Writing Implements and Accessories
MSC Starrett Ball Point and Holder, Steel, Polished Chrome
The Starrett C251E Ball Point and Holder is a steel tool with a polished chrome finish, designed for use with C251A, C251B, and C251C Trammels. It includes assorted ball points for various applications, and its bright chrome finish ensures extended life and corrosion resistance.
- Steel construction
- Polished chrome finish for longer life and corrosion resistance
- Designed for use with C251A, C251B, and C251C Trammel
- Includes assorted ball points
MSC Starrett Depth Micrometer Replacement Rod, 0-1 Inch, For 449 Series
This replacement rod for depth micrometers is engineered for precision and durability. It offers a measurement range of 0 to 1 inch (0 to 25 mm) and is specifically designed for compatibility with 449 Series micrometer depth gages. Manufactured with high standards, it ensures consistent and accurate performance.
- Adjustable rods are hardened, ground, and lapped for permanent accuracy.
- Manufactured in the USA with US and global content.
- Designed for use with 449 Series micrometer depth gages.
- Provides a measurement range of 0 to 1 inch (0 to 25 mm).
MSC Starrett Blade Type Micrometer, 0-1 in, 0.001 in Graduations, Speeder Thimble
This Blade Type Micrometer is a precision hand tool for accurate measurements of circular form tools, narrow grooves, slots, keyways, and recesses. It features a 0-1 in range with 0.001 in graduations, suitable for intricate applications.
- Blades are 0.030 in thick and measure to 5/16 in deep.
- Balanced frame and thimble design for easy handling.
- Speeder for quicker adjustment.
- Non-rotating spindle prevents blade turning in narrow slots.
- Satin chrome finish resists rust and glare.
- Advanced sleeve design with staggered lines for easy readability.
- Rigid steel frame, ribbed for strength.
- Extremely hard and stable one-piece spindle.
- Quick and easy adjustment.
MSC Starrett Outside Micrometer, 0-1 in, 0.0001 in Graduation, Ratchet Stop Thimble, Carbide Face
This Starrett Outside Micrometer is a precision measuring tool known for its balanced frame and thimble design. It offers quick-reading figures and a tapered frame for use in narrow spaces. Its satin chrome finish resists rust and glare.
- Extremely hard and stable one-piece spindle.
- Advanced sleeve design for precise, easy readability.
- Balanced frame and thimble for easy handling.
- Tapered frame for narrow slots and tight places.
- Quick and easy adjustment.
- Quick-reading figures (every thousandth numbered on inch tools).
- Reaches places most micrometers cannot.
- Satin chrome rust and glare resistant finish.
- Ratchet stop for uniform pressure.
- Lock nut for quick and sure locking.
- Micro-lapped measuring faces.
Grainger Engraving Tool 10.00mm L of Cut Carbide
The Micro 100 Engraving Tool Single End 16T024 is a single end engraving tool made by Micro 100. It has a 0.016" tip diameter and 0.024" neck diameter. The overall tool length is 2.5" and the flute length is 0.75". It is made of solid carbide and has a TiAlN coating. The engraving tool has a straight shank and is designed for use on materials like plastics, wood, aluminum and brass. It can be run at speeds up to 45,000 RPM. The tool provides excellent chip control when engraving, routing and profiling.
Grainger Engraving Tool 1/2 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R989 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8 inch, an overall length of 3 inches, and a cutting diameter of 1/32 inch. This engraving tool is designed for hand engraving in materials like plastics, soft metals, wood, and fiberglass. It can produce fine detailed engravings with its small cutting edge. The tool has a 3 inch reach for engraving recessed areas. It is made in the USA from M2 high speed steel for good wear resistance and heat tolerance. The 16R989 is a quality engraving tool well suited for detailed hand engraving work.
Grainger Engraving Tool 1/2 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R990 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8 inch and an overall length of 4 inches. The tool features a 135 degree point angle for detail engraving in materials like plastics, wood, aluminum and brass. It can be used in low to medium production runs at spindle speeds up to 15,000 RPM. The tool's high-speed steel construction provides good wear resistance.
Grainger Engraving Tool 6.00mm L of Cut Carbide
The Grainger 16R893 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web nylon construction with abrasive particles throughout for scrubbing and cleaning. This 6 inch by 9 inch hand pad has a medium duty abrasiveness that is suitable for cleaning pots, pans, dishes, flatware, and other kitchen items. It effectively removes dried or burnt on food and provides general purpose scrubbing. The open web design allows debris to pass through the pad during use. It can be used wet or dry.
Grainger Engraving Tool 7/16 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R988 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8 inch and an overall length of 3 inches. The tool features a 135 degree point angle for detail engraving in materials like plastics, wood, aluminum and brass. It can be used in low to medium production runs at spindle speeds up to 15,000 RPM in CNC machines. The tool's high-speed steel construction provides wear resistance and heat resistance during engraving operations.
Grainger Engraving Tool 1/2 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R941 is a single-ended carbide engraving tool with a 0.010" tip diameter and 0.250" shank diameter. It has a 30 degree included angle and is made of solid carbide for engraving in steel, aluminum, and other non-ferrous metals. The overall length is 3" and it has a bright finish. This is a high quality precision engraving tool suitable for detailed engraving work in metals.
Grainger Engraving Tool 7.00mm L of Cut Carbide
The Micro 100 Engraving Tool Double End 16T021 is a double-ended carbide engraving tool with a 1/8" shank diameter. It has a 60 degree included angle and a 0.005" tip radius. The overall length is 2-1/2". It is designed for hand engraving in materials like plastics, soft metals, wood, and fiberglass. The double-ended design provides two cutting edges for extended tool life. Made in the USA from solid carbide, this high quality engraving tool is rigid and durable for precision engraving results.
Grainger Engraving Tool 10.00mm L of Cut Carbide
The Micro 100 Engraving Tool Single End 16T022 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8", an overall length of 2-1/2", and a flute length of 1-1/4". The tool features a 30 degree helix angle and a 0.005" tip radius for detailed engraving work in materials like plastics, soft metals, wood, and composites. With its micro grain high-speed steel construction, this engraving tool provides good wear resistance and tool life. The single end cutting edge allows for engraving in tight areas. Overall, this is a versatile hand engraving tool well-suited for detailed engraving work.